Datasheet

 4 x utility button inputs
 1 x soft power switch input
 1 x power LED output
 Plasma button connector
 Breakout pins for power, I2C, and 2 additional buttons
 Picade X HAT pinout
 Compatible with all 40-pin Raspberry Pi models
The I2S DAC blends both channels of digital audio from the Raspberry
Pi into a single mono output. This is then passed through a 3W
amplifier to power any connected speaker.
The board also features a soft power switch that allows you turn your
Pi on and off safely without risk of SD card corruption. Simply tap the
connected button to start up, and press and hold for 3 seconds to fully
shutdown and disconnect power.
Raspberry Pi not included.
Note: Picade X HAT is compatible with all 40-pin Pi versions,
including Pi 4.
Product Dimensions: 65.0mm x 57.0mm x 16.0mm / 2.6" x 2.2" x 0.6"
Product Weight: 24.4g / 0.9oz