Datasheet

Pimoroni has taken all the great features of the Picade PCB and

crammed them onto this Picade X HAT. It's the best, easiest way to

make an arcade system using any Raspberry Pi.

Simply pop it onto your Pi, plug your Pi power supply into the USB-C

connector on the Picade HAT (it back-powers your Pi through the GPIO,

so no need for a separate power supply), wire up your controls to the

terminal blocks, and install their driver! It's ideal for your own custom

arcade builds or interfaces that need big colourful buttons.

Features:

 I2S audio DAC with 3W amplifier (mono) and push-fit terminals

 Safe power on/off system with tactile power button and LED

 USB-C connector for power (back-powers your Pi)

 4-way digital joystick inputs

 6 x player button inputs

PAGE 1
Pimoroni has taken all the great features of the Picade PCB and crammed them onto this Picade X HAT. It's the best, easiest way to make an arcade system using any Raspberry Pi.
PAGE 2
 4 x utility button inputs  1 x soft power switch input  1 x power LED output  Plasma button connector  Breakout pins for power, I2C, and 2 additional buttons  Picade X HAT pinout  Compatible with all 40-pin Raspberry Pi models The I2S DAC blends both channels of digital audio from the Raspberry Pi into a single mono output. This is then passed through a 3W amplifier to power any connected speaker.