Datasheet

Ideal for monitoring conditions in your house, garage, and more,

the Pimoroni Enviro pHAT packs 4 different sensors, letting you

measure temperature, pressure, light level, colour, 3-axis motion,

compass heading, and analogue inputs.

Snap it on top of a Raspberry Pi Zero (or any Raspberry Pi with a 2x20

connector) for a comprehensive environment-sensing pHAT powered

directly from the Pi. Set up a web server with Flask and remotely

monitor everything from anywhere.

As with other pHATs, it works with all of the 40-pin Raspberry Pi

variants - 3/2/B+/A+/Zero - but using it with the Pi Zero makes for a

super-tiny package.

PAGE 1
Ideal for monitoring conditions in your house, garage, and more, the Pimoroni Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analogue inputs. Snap it on top of a Raspberry Pi Zero (or any Raspberry Pi with a 2x20 connector) for a comprehensive environment-sensing pHAT powered directly from the Pi. Set up a web server with Flask and remotely monitor everything from anywhere.
PAGE 2
Combining the Enviro pHAT with other Pimoroni HATs and pHATs gives almost endless possibilities: display sensor values on Unicorn pHAT, use the Display-O-Tron HAT to display sensor data, display a graph of values with the Scroll pHAT, and much, much more. Features:  BMP280 temperature/pressure sensor  TCS3472 light and RBG colour sensor  Two LEDs for illumination  LSM303D accelerometer/magnetometer sensor  ADS1015 4-channel 3.