Owner manual

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
5-3
5.2 Install transmitter and receiver
5 Installation
Fig. 5-2: Installing the transmitter and receiver
Viewed from the operator's side, the receiver is installed on the left-hand
bracket and the transmitter on the right-hand bracket.
 Slide the nut slot on the adjustment plate into the groove on the
bracket attached to the upper die.
Nut
Auxiliary adjustment plate
Adjustment plate
Flat washer