Owner manual

12.1 Check list
12 Attachment
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
12-2
Date: …………………………………………
Signature: ………………………………………………………………
4 Visual inspection
Make sure that there are no objects in the protected
space between the transmitter and receiver.
Make sure that there are no transparent materials
between the transmitter and receiver (e.g. glass
panel).
Are all the mechanical connections to the
PSENvip attached correctly?
Cables are undamaged?
5 Check commissioning
Has the system been commissioned correctly in ac-
cordance with the documentation?
6 Check the circuitry of the programmable safety
and control system
Have the outputs that have been defined as OSSDs
been incorporated in accordance with the required
category?
Are the switching elements that are connected to
the outputs (e.g. valves, contactors) monitored via
feedback loops?
Does the wiring of the inputs and outputs match the
circuit diagram?
7 Check the effectiveness of the PSENvip during
the hazardous movement
Is the PSENvip effective throughout the whole of the
hazardous movement of the plant/machine?
Is the safety function tested in accordance with the
instructions specified in this documentation?
8 Check protected field modes
Do the protected field modes operate in accordance
with the setting of the operating mode selector
switch?
No. Action OK Not
OK
Remarks