Manual

OPERATING MANUAL PSEN op4F/H-A series

1003067-EN-02

• Code 1 or Code 2

If the two light curtains

− are installed at a distance that is lower than the minimum distance permitted for

identical devices

− and has RX on the same side,

the user must configure the light curtains with different codes.

NOTE: The configuration performed using the GUI only changes the code on

the RX side; for the light curtain to operate correctly, the user must configure

the TX side with the same code via BCM.

Fig. 61 – Code 1 and Code 2

If one of the three options (no code, code 1 and code 2) has been selected and beams have

been interrupted, the following display appears on the user interface.

Normal operating mode (RX side): beams interrupted

LED Level

PWR

OSSD

EDM

ACM

LEVEL

No Code LED 5 and 6 OFF

Code 1 LED 5 ON Red, LED 6 OFF

Code 2 LED 5 OFF LED 6 ON Green

Normal operating mode (TX side)

PWR

TST

CODE

No Code LED 5 and 6 OFF

Code 1 LED 5 ON Red, LED 6 OFF

Code 2 LED 5 OFF LED 6 ON Green