Manual

PSEN op4F/H-A series OPERATING MANUAL

1003067-EN-02

• FIXED blanking

The panel on the right shows the settings for the active blanking zone (in the example

shown below, the active blanking zone is 3 beams in size and is 7 beams from the bottom

of the light curtain; no tolerance is set).

• FIXED blanking with increased tolerance (top

or bottom )

The example shown below illustrates the settings with fixed blanking and an increased top

tolerance: only fixed blanking zones are permitted above this zone; fixed blanking zones as

well as zones with total surveillance are permitted below this zone.