Manual

PSEN op4F/H-A series OPERATING MANUAL
18
1003067-EN-02
The following graphic shows the distance from the interfering devices (D
do
), based on the
operating range (D
op
) of the pair (TX A – RX A).
Fig. 12
For the purpose of simplification, the table below states the values of the minimum safety
distances required for installation, with reference to some operating ranges.
Operating range
(m)
Minimum safety distance
(m)
3
0.3
6
0.4
10
0.5
19
0.6
WARNING: The interfering transmitter (TX B) must be positioned at
the same distance D
do
, as calculated above,
even if the distance
from the other transmitter TX A is shorter than from the receiver
RX A.
Reichweite
Operating range
Distance between two
devices of the same type