User Manual

1002908-EN-02
PSEN op Protective Column/1
Operating Manual
6 Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail] Original document
Installation of PSEN op Mirror/1
Use the PSEN op Protective Bracket Mirror/1 kit to install the
deviation mirror in the protective column.
Insert the screw through the opening and fix it with the nut.
Fix the sliding block on the screw. Insert the deviating mirror in the
lateral guide and insert the sliding block in the T groove (Fig. 5).
Set the height of the deviation mirror and tighten the screws.
Tighten the nut under the opening to avoid unintended loosening.
Fig. 5
T groove in central guide
Lateral guides