User Manual

1002908-EN-02
PSEN op Protective Column/1
Operating Manual
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany 5
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail] Original document
To set the height of the product, loosen the screws M5x8 with an
Allen screw (Fig. 4). If the protective column is in vertical position,
make sure that the product does not slip downward.
Fig. 4
Screw the cover back on when the product has been completely
inserted and the height in the protective column has been set.
Screws M5x8