User Manual

1002908-EN-02
PSEN op Protective Column/1
Operating Manual
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany 3
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail] Original document
Installing PSEN op Protective Bracket
Using the PSEN op Protective Bracket-4/1 kit for product versions
from 150 to 1050 mm or the PSEN op Protective Bracket-6/1 kit for
versions from 1200 to 1800 mm, assemble the subunits as shown
in Fig. 2, then insert them into the corresponding grooves of the
product and fix them. Do not tighten the nut M5 under the mounting
bracket (a profile of type PSEN op 2/4 base is used in the following
example).
Fig. 2
Nut M5
Do not tighten the screws