Manual

- 8 -
Konventioneller thermischer Strom bei gleichzeitiger Belastung mehrerer Kontakte/Conventional thermal current
while loading several contacts/Courant thermique conventionnel en cas de charge sur plusieurs contacts
Anzahl der Kontakte/number of contacts/nombre des contacts 3 2 1
I
th
4,5 A 6 A 6 A
Typ/
Type/
Type
PNOZ X2.7P C
PNOZ X2.7P
PNOZ X2.8P C
PNOZ X2.8P
Merkmale/
Features/
Caractéristiques
24 - 240 V AC
24 - 240 V AC
24 - 240 V AC
24 - 240 V AC
Klemmen/
Terminals/
Borniers
Federkraftklemmen/spring-loaded terminals/
borniers à ressort
Schraubklemmen/screw terminals/borniers à vis
Federkraftklemmen/spring-loaded terminals/
borniers à ressort
Schraubklemmen/screw terminals/borniers à vis
Bestell-Nr./
Order no./
Référence
787 306
777 306
787 302
777 302
Bestelldaten/Order reference/Caractéristiques
24 - 240 V DC
24 - 240 V DC
24 - 240 V DC
24 - 240 V DC
Alle in einer Sicherheitsfunktion verwende-
ten Einheiten müssen bei der Berechnung
der Sicherheitskennwerte berücksichtigt
werden.
All the units used within a safety function
must be considered when calculating the
safety characteristic data.
INFORMATION
A safety function’s SIL/PL values are
not identical to the SIL/PL values of
the units that are used and may be
different. We recommend that you
use the PAScal software tool to
calculate the safety function’s SIL/PL
values.
Toutes les unités utilisées dans une fonction
de sécurité doivent être prises en compte
dans le calcul des caractéristiques de
sécurité.
INFORMATION
Les valeurs SIL / PL d’une fonction
de sécurité ne sont identiques aux
valeurs SIL / PL des appareils
utilisés et peuvent varier par rapport
à celles-ci. Pour le calcul des valeurs
SIL / PL de la fonction de sécurité,
nous recommandons l’outil logiciel
PAScal.
INFO
Die SIL-/PL-Werte einer Sicherheits-
funktion sind nicht identisch mit den
SIL-/PL-Werten der verwendeten
Geräte und können von diesen
abweichen. Wir empfehlen zur
Berechnung der
SIL-/PL-Werte der Sicherheits-
funktion das Software-Tool PAScal.
Es gelten die 2010-07 aktuellen Ausgaben
der Normen
The version of the standards current at
2010-07 shall apply
Se référer à la version des normes en vigeur
au 2010-07.