Owner's manual

Supplementary data
Operating Manual PNOZ s30
1001715-EN-13
84
Connection




 








 



 

 
 















 


 



  

Incremental encoder connection
Features
PNOZ s30
} Speed monitoring:
Monitoring for overspeed for the operating modes "Setup" and "Automatic", which are
selected with the switch S1.
– The operating mode "Setup" is selected if the select input SEL1 is activated. Over-
speed is detected during setup at >= 50 Hz and the output Rel. 2 switches off.
– The operating mode "Automatic" is selected if the select input SEL2 is activated.
Overspeed is detected during automatic mode at >= 3000 Hz and the output Rel. 2
switches off.
– If a speed of 2800 Hz is exceeded, the semiconductor output Out1 switches in auto-
matic mode and a message (advance warning) is output via the PLC.
9.3.1.3
9.3.2
9.3.2.1