Owner's manual

Supplementary data
Operating Manual PNOZ s30
1001715-EN-13
74
The reaction function that takes place (e.g. shutting down the drive, activating a mechanical
brake) when exceeded limit values are detected during the normal operation of the safety
function must be defined and implemented by the machine/plant developer and does not
form part of the PNOZ s30.
The monitoring function of the PNOZ s30 can be used to implement safety functions de-
fined in the standard EN 61800-5-2 for Adjustable speed electrical power drive systems.
Safety functions in accordance with
EN 61800-5-2
Implementation with PNOZ s30 safety func-
tion
Safe Operating Stop (SOS) Standstill, position
Safely Limited Speed (SLS) Speed
Safe Speed Range (SSR) Speed range
Safe Direction (SDI) Direction
Safe Speed Monitor (SSM) Speed, speed range
Safety-related characteristic data for operation with non-safety-related
rotary encoder without additional requirements
Permitted encoder types and output signals
Permitted encoder types:
} Rotary non-safety-related encoders
} Linear non-safety-related encoders
Permitted output signals:
} Square output signals TTL, single ended
} Square output signals TTL, differential
} Square output signals HTL, single ended
} Square output signals HTL, differential
} Sin/Cos output signals 1Vss, reference voltage
} Sin/Cos output signals 1Vss, differential
Safety-related architecture
To calculate the safety function you will need the following data for the "sensor" subsystem
and "PNOZ s30" subsystem:
Sensor PNOZ s30 subsystem
Category MTTFd DC Operating mode PFH (1/h)
1* Manufactur-
er-specific
0 % Monitoring
1 encoder
2,34-08
*In accordance with EN ISO 13849-1, Category 1 is only met if the sensor is a "well-tried
component".
9.2.3
9.2.3.1
9.2.3.2