Owner's manual

Commissioning
Operating Manual PNOZ s30
1001715-EN-13
46
Other, pre-defined settings:
} Switch functions
– Direction (F3)
Direction left
Tolerance for wrong direction = 10 Imp
– Direction (F4)
Direction right
Tolerance for wrong direction = 10 Imp
} Parameter set/select input
P0, select inputs are ignored (Select inputs mode: "None")
} Hysteresis
Standstill and speed, 2 % each
} Output assignment
– Standstill: Relay output Rel. 1 and semiconductor output Out 1
– Speed: Relay output Rel. 2 and semiconductor output Out 2
– Direction left: External output Ext. 1 and semiconductor output Out 3
– Direction right: External output Ext. 2 and semiconductor output Out 4
} Reset mode
– All outputs: Automatic reset
} Switch delay
None
} Max. encoder frequency
1 MHz