Owner's manual

Commissioning

Operating Manual PNOZ s30

1001715-EN-13

Create configuration overview

For a better overview, before entering the configuration values we recommend that they are

entered in the attached form PNOZ_s30_Config_Overview:

Operate rotary knob

The rotary knob:

} (A) should be pulled out until it clicks into position

} (B) then released and retracted back into the unit:

– Press the latch on the side of the rotary knob (1) towards the centre of the knob.

This releases the rotary knob.

– Press the knob downwards (2) while keeping the latch held down.

6.2.1

6.2.2