Datasheet

Electronic monitoring relays PMDsrange
Thermistor monitor
S1MS
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
1003090-EN-01 2013-09
6
Relay outputs 840725 840740 840775
Utilisation category
In accordance with the
standard EN 60947-5-1 EN 60947-5-1 EN 60947-5-1
Auxiliary contacts,
AC15 at 230 V 230 V 230 V
Max. current 2,0 A 2,0 A 2,0 A
Auxiliary contacts,
DC13 (6 cycles/min) at 24 V 24 V 24 V
Max. current 1,5 A 1,5 A 1,5 A
Contact fuse protection,
external auxiliary contacts
Blow-out fuse, quick 6 A 6 A 6 A
Blow-out fuse, slow 4 A 4 A 4 A
Circuit breaker, 24
V AC/DC, characteristic
B/C 4 A 4 A 4 A
Contact material AgCdO + 3,0 µm Au AgCdO + 3,0 µm Au AgCdO + 3,0 µm Au
Times 840725 840740 840775
Switch-on delay
Typ. switch-on delay 350 ms 350 ms 350 ms
Environmental data 840725 840740 840775
Climatic suitability EN 60068-2-78 EN 60068-2-78 EN 60068-2-78
Ambient temperature
Temperature range -10 - 55 °C -10 - 55 °C -10 - 55 °C
Storage temperature
Temperature range -40 - 85 °C -40 - 85 °C -40 - 85 °C
EMC EN 60947-5-1, EN 61000-
6-2
EN 60947-5-1, EN 61000-
6-2
EN 60947-5-1, EN 61000-
6-2
Vibration
In accordance with the
standard EN 60068-2-6 EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 55,0 Hz 10,0 - 55,0 Hz 10,0 - 55,0 Hz
Amplitude 0,35 mm 0,35 mm 0,35 mm
Airgap creepage
In accordance with the
standard EN 60947-1 EN 60947-1 EN 60947-1
Overvoltage category III / II III / II III / II
Pollution degree 2 2 2
Rated insulation voltage 250 V 250 V 250 V
Rated impulse withstand
voltage 4,00 kV 4,00 kV 4,00 kV