Datasheet

Two-hand control unit
Up to PL e of EN ISO 13849-1
P2HZ X1
1002151-EN-02-2012-05Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
-4
Terminal configuration
Klemmenbelegung
Installation
][Montage_Zweihand
 The safety relay should be installed
in a control cabinet with a protec-
tion type of at least IP54.
 Use the notch on the rear of the unit
to attach it to a DIN rail.
 Ensure the unit is mounted securely
on a vertical DIN rail (35 mm) by us-
ing a fixing element (e.g. retaining
bracket or an end angle).
Notice
The distance of the button connected
to the two-hand relay from the nearest
danger zone must be large enough
that if one of the buttons is released,
the dangerous moment is interrupted
before the operator can reach into the
danger zone (see EN 999 “The posi-
tioning of protective equipment in re-
spect of approach speeds of parts of
the human body”).
Dimensions
Abmessungen
P2HZ X1
A1 13 23
Y32 Y35
Y1 Y2
S11 S12 S13 S21 S22 S23
POWER
14 24 A24241
Y31Y30
34
33
CH.1
CH.2
S12/S22
S13/S23
S11/S21
20510
121 (4.76")
75 (2.95")
87 (3.42")
45
(1.77")