Datasheet

ManualsBrandsPilz ManualsAutomationBasic License for Pnozmulti Configuration

PNOZmulti Configurator

-EN-

General

This version is available in the following languages:

} German

} English

As soon as there is an update for the languages available from Pilz (French, Spanish,

Italian, Japanese, Chinese), the languages can be downloaded from the Internet in a ser-

vice pack. The current service pack is in the download area on the Pilz homepage at http://

www.pilz.com/support/downloads/

This document contains important information, which must be noted. This document also

contains details of the changes made in the software tool from one version to the next.

This product includes code licensed by RSA Security, Inc. Some portions licensed by IBM

are available at http://site.icu-project.org/download.

System requirements

Operating system: Windows Server 2008/Vista (32 Bit)/7 (32

Bit, 64 Bit/8 (32 Bit, 64 Bit)/8.1 (32 Bit, 64

Bit)/10 (32 Bit, 64 Bit)

Processor: Min. 1 GHz

RAM: Min. 1024 MB

Hard disk: 20 GB; min. 15 GB of available disk space

Graphics card: Support for Super VGA graphics

Text size Smaller - 100% (default)

Browser: Internet Explorer from Version 9

The operating systems Windows 98 and Windows ME are no longer supported from Ver-

sion 4.0.0.

The operating system Windows NT is no longer supported from Version 5.2.0.

The operating system Windows 2000 is no longer supported from version 8.1.1.

The operating system Windows XP is no longer supported from Version 9.6.0.

The operating system Windows Server 2003 is no longer supported from Version 10.0.0.

Important information

Installation

Access rights

Write access to the installation directory is required in order to install and start the software

tool.

To install under Windows Server 2008, Windows Vista, Windows 7, Windows 8, Windows

8.1 and Windows 10, users must have administrator rights.

You need access to "HKEY_LOCAL_MACHINE Registry key".

} Close programs

Please close all open programs on your PC before installing the software tool.

} Network installation

The software tool cannot be installed on a network drive.

Summary of content (22 pages)

PAGE 1
PNOZmulti Configurator General This version is available in the following languages: } German } English As soon as there is an update for the languages available from Pilz (French, Spanish, Italian, Japanese, Chinese), the languages can be downloaded from the Internet in a service pack. The current service pack is in the download area on the Pilz homepage at http:// www.pilz.com/support/downloads/ This document contains important information, which must be noted.
PAGE 2
PNOZmulti Configurator Do not remove the DVD Do not remove the DVD from the drive during the installation process. Licensing The demo version of the PNOZmulti Configurator is available after installation. The demo version has a restricted function range compared to the full version. To access the full version you first need to license the software. Where licences are subject to a time restriction, do not put back the system clock or your licence will be rendered invalid.
PAGE 3
PNOZmulti Configurator 3. Select "Data" -> "External Data" -> "Import Text File". 4. Select "UTF-8" coding, and "Comma" as the separator. Chip card readers with COM port The operating systems Windows 7, Windows 8 and Windows 8.1 do not support chip card readers with COM port. Chip card reader with USB interface (PNOZ chip card reader) When communicating with the PNOZmulti Configurator no connection is established to the USB chip card reader (PNOZ chip card reader, order no. 779 230).
PAGE 4
PNOZmulti Configurator Opening PNOZmulti projects (.mpnoz files) If the file name of a PNOZmulti project (.mpnoz files) uses characters that are not included in your operating system's Windows Codepage, an error message will appear if you wish to open the file by double-clicking on it or by using Open with from Windows. In this case, open the file in the PNOZmulti Configurator.
PAGE 5
PNOZmulti Configurator New expansion module for base unit PNOZ m B1 A new expansion module for connection to the base unit PNOZ m B1 is supported: } PNOZ m ES 14DO The expansion module provides 14 semiconductor outputs for standard applications. Changes in Version 10.2.0 New functions Migration function If you convert your hardware to a newer system (e.g. from PNOZmulti to PNOZmulti 2) you can now migrate the data from the original project largely automatically.
PAGE 6
PNOZmulti Configurator New functions New base unit A new base unit is supported: } Base unit PNOZ m B1 Base unit for the new configurable control system PNOZmulti 2 Additional functions in comparison with other PNOZmulti base units: – Up to 8 expansion modules can be connected to the right of the base unit – Up to 4 expansion modules can be connected to the left of the base unit – Maximum program size expanded: Up to 1024 connections can be inserted between the elements.
PAGE 7
PNOZmulti Configurator Module programs for PNOZmulti 2 } With the PNOZmulti 2 system, motion monitoring modules are configured in a separate subprogram, the module program (mlQ). } Supported modules: Motion monitoring modules PNOZ m EF 1/2MM (V2.0) } One module program is created per module. } Up to 32 diagnostic bits can be configured and then evaluated in the main program.
PAGE 8
PNOZmulti Configurator Other changes for the PNOZmulti Configurator } New button in the toolbar: Show/hide problems } When downloading a project to a base unit, a warning is now issued if the version of the base unit in the configured project is higher than that of the base unit into which the project is to be downloaded. } Improvements when exporting elements and connections } The "Cloud 2700F" chip card reader is now supported. Changes in Version 9.5.
PAGE 9
PNOZmulti Configurator Other changes for the PNOZmulti Configurator In the hardware configuration, 6 rather than the previous 4 modules can now be inserted to the right of the base unit PNOZ m B0. Changes in Version 9.4.
PAGE 10
PNOZmulti Configurator New functions Safe Ethernet connection The safe Ethernet connection enables a point-to-point connection of 48 virtual inputs and 48 virtual outputs between a PNOZmulti base unit and a PSS 4000 device. The inputs and outputs are safety-related. The virtual inputs/outputs and connection settings are configured in the PNOZmulti Configurator. Changes in Version 9.2.
PAGE 11
PNOZmulti Configurator } Chinese Changes in Version 9.1.0 This version is available in the following languages: } German } English New functions New base units New base units are supported: } Base unit PNOZ m B0 Version 1.1 Version 1.1 of the base unit of the new configurable control system PNOZmulti 2. } Base unit PNOZ mm0p-T Base unit for the new configurable control system PNOZmulti Mini.
PAGE 12
PNOZmulti Configurator Changes in Version 9.0.1 This version is available in the following languages: } German } English } French } Spanish } Italian } Japanese } Chinese Changes in Version 9.0.
PAGE 13
PNOZmulti Configurator } English } French } Spanish } Italian } Japanese } Chinese Changes in Version 8.1.0 This version is available in the following languages: } German } English New functions New expansion modules PNOZmulti Mini Fieldbus modules for connection to the base units PNOZ mm0.1p and PNOZ mm0.2p are supported. New input element Input element "safety mat" is now supported also for PNOZmulti Mini.
PAGE 14
PNOZmulti Configurator New functions Macros There are now 2 types of macros: } As before: Templates This type of macro is supported since Version 7.0.0 of PNOZmulti Configurator: A template simply serves as a model. Sections of the user program that are defined as templates are reused by inserting them into the user program as copies, which can then be edited independently.
PAGE 15
PNOZmulti Configurator New speed monitors Three new speed monitors are supported: } PNOZ ms2p TTL } PNOZ ms3p TTL } PNOZ ms3p HTL New expansion modules PNOZmulti Mini Two new link modules for connection to the base units PNOZ mm0.1p and PNOZ mm0.2p are supported: } PNOZ mml1p This expansion module is used for safe connection of two PNOZmulti base units. It contains the same functions as the link module PNOZ ml1p.
PAGE 16
PNOZmulti Configurator } English New functions Expanded functions for the base unit Mini PNOZ mm0p } Display Messages You can configure messages with your own texts. These can be linked to function and logic elements and shown on the base unit display. } } Configurable inputs/outputs – The inputs/outputs IM0 – IM3, IM16 – IM19 can be configured as inputs or as outputs for standard functions. – The outputs T0 – T3 can be configured as outputs for standard functions or as test pulses.
PAGE 17
PNOZmulti Configurator } PVIS is supported PVIS expanded diagnostics can be used. Base units PNOZ m0p ETH, PNOZ m2p ETH, PNOZ m3p ETH The base unit PNOZ m0p, PNOZ m2p and PNOZ m3p is now also available as a version with Ethernet interface. The overall Ethernet function corresponds to that of the PNOZ m1p ETH. Enhanced Ethernet functions } The device Ethernet connection (connection on the base unit) and the project Ethernet connection (saved within the project) can now be configured separately.
PAGE 18
PNOZmulti Configurator Changes in Version 7.0.0 New functions New expansion module for connecting decentralised inputs/outputs A new connection module for connecting decentralised inputs/outputs is supported: } PNOZ ml2p – Decentralised inputs can be configured in the function elements. – Up to 8 decentralised inputs per link module can be configured. – Decentralised standard outputs, 24 V outputs or test pulse outputs can be configured.
PAGE 19
PNOZmulti Configurator } New display for limiting connections in the status window Print report workspace expanded } Display for negation was updated. } Enhanced display of connection lines Driver The USB driver for the base unit PNOZ mm0p is now installed automatically. Changes in Version 6.4.0 New functions New base unit A new base unit is supported: } PNOZ m1p ETH.
PAGE 20
PNOZmulti Configurator Changes in Version 6.3.0 New functions New base unit A new base unit is supported: } PNOZ mm0p. Base Unit Mini PNOZ mm0p } 20 inputs and 4 safe semiconductor outputs can be configured. } The semiconductor outputs on the PNOZ mm0p can be configured as safe semiconductor outputs with advanced fault detection.
PAGE 21
PNOZmulti Configurator Enhanced display of connection lines The algorithm for displaying the connection lines has been improved. Project languages Project texts can be exported, translated and reimported. Project texts are: } Location descriptions for the input and output elements, } user text, } page names, } page user text that can be entered on each page of the project, } equipment identifiers can be translated (in the Tools/Activate options menu).
PAGE 22
PNOZmulti Configurator Speed monitor PNOZ ms3p The speed monitor PNOZ ms3p has the same functions as the speed monitor PNOZ ms2p, but it includes expanded diagnostics and more error stack information. Also, an input can be configured to deactivate speed monitoring. All the outputs are set to the signal status "0" as soon as the deactivation input has the signal status "1". Speed monitor PNOZ ms4p The speed monitor PNOZ ms4p has the same functions as the speed monitor PNOZ ms3p.