Datasheet

PNOZmulti 2 products
Fieldbus modules
PNOZ m ES CANopen
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
841
PNOZ m ES CANopen
Overview
Unit features
Using the product PNOZ m ES CANopen:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti 2 .
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for CANopen
} Station addresses from 0 ... 99, selected via rotary switch
} Transmission rate selected via rotary switch (1 MBit/s, 10 kbit/s, 125 kBit/s, 20 kbit/s,
250 kBit/s, 50 kbit/s, 500 kBit/s, 800 kbit/s)
} Status indicators for communication with CANopen and for errors
} 128 virtual inputs and outputs on the control system PNOZmulti 2 can be defined in the
PNOZmulti Configurator for communication with the fieldbus CANopen.
} Max. 1 PNOZ m ES CANopen can be connected to the base unit
} Plug-in connection terminals:
either spring-loaded terminal or screw terminal available as an accessory (see order
reference)
} Please refer to the document "PNOZmulti System Expansion" for details of the base
units PNOZmulti 2 that can be connected.