Datasheet

PNOZmulti 2 products
Motion monitoring modules
PNOZ m EF 1MM
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
756
Connect encoder via an adapter
The adapter (see Accessories [
764]) is connected between the encoder and the drive.
The output on the adapter is connected to the socket on the PNOZ m EF 1MM.
Encoder
1 8
PNOZ m EF 2MM
Connection of proximity switch and encoder
When connecting the encoders and proximity switches, please refer to the chapter entitled
"EMC-compliant wiring".
Sensor types:
} Configuration: HTL single Z Freq. Ini pnp
– HTL single ended (A,B) + Ini pnp (Z)
– HTL single ended (A,B) + HTL differential (A as Z)
– HTL single ended (A,B) + HTL single ended (A as Z)
} Configuration: TTL single Z Freq. Ini pnp
– TTL single ended (A,B) + Ini pnp (Z)
– TTL single ended (A,B) + HTL differential (A as Z)
– TTL single ended (A,B) + HTL single ended (A as Z)
Please note:
Tracks /A, /B and /Z must remain free.