Datasheet

PNOZmulti Mini products
Fieldbus modules
PNOZ mmc6p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
625
PNOZ mmc6p
Overview
Unit features
Using the product PNOZ mmc6p:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti Mini
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for CANopen
} Station addresses from 0 ... 99, selected via rotary switch
} Transmission rate selected via rotary switch (1 MBit/s, 10 kbit/s, 125 kBit/s, 20 kbit/s,
250 kBit/s, 50 kbit/s, 500 kBit/s, 800 kbit/s)
} Status indicators for communication with CANopen and for errors
} 24 virtual inputs and outputs on the control system PNOZmulti can be defined in the
PNOZmulti Configurator for communication with the fieldbus CANopen . The number of
inputs and outputs can be extended to 128. Please note that when the extended inputs
and outputs 24 - 127 are used they have different properties (see document entitled
"Communication Interfaces").
} Max. 1 PNOZ mmc6p can be connected to the base unit
} Plug-in connection terminals:
either spring-loaded terminal or screw terminal available as an accessory (see order
reference)
} For details of the PNOZmulti Mini base units that can be connected, please refer to the
document "PNOZmulti System Expansion".