Datasheet

PNOZmulti Mini products
Link modules
PNOZ mml2p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
578
Front view
Power
Ready
Traffic
Fault
Key:
} 0 V, 24 V:
Supply connections
} CAN+, CAN-, VCC, GND:
Connection for decentralised modules
} FE:
Functional earth
Function description
Operation
The link module PNOZ mml2p is used to safely transfer the input information from decent-
ralised modules to the safety system PNOZmulti.
The function of the inputs and outputs on the control system depends on the safety circuit
created using the PNOZmulti Configurator. A chip card is used to download the safety cir-
cuit to the base unit. The base unit has 2 microcontrollers that monitor each other. They
evaluate the input circuits on the base unit and expansion modules and switch the outputs
on the base unit and expansion modules accordingly.