Datasheet

PNOZmulti Mini products
Base units
PNOZ mm0.1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
534
Load project via USB port
Procedure:
} Insert a chip card into the card slot on the base unit.
} Connect the computer containing the PNOZmulti Configurator to the base unit via the
USB port.
} Switch on the supply voltage.
} Download the project (see PNOZmulti Configurator's online help).
} Once the project has been successfully downloaded, the status of the inputs and out-
puts and the supply voltage will be shown on the display. The "RUN" LED will be lit.
Connection
Supply voltage AC DC
For the safety system
A1
+ 24 V DC
A2
0 V
For the semiconductor outputs
Must always be present, even if
the semiconductor outputs are not
used
24 V
+ 24 V DC
0 V
0 V
Input circuit Single-channel Dual-channel
E-STOP
without detection of shorts across
contacts
S1
IM0
L+
S1
IM1
IM0
L+
L+
E-STOP
with detection of shorts across
contacts
IM0
T0M20
S1
S1
T1M21
IM1
T0M20
IM0