Datasheet

PNOZmulti Mini products
Base units
PNOZ mm0.1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
531
Function description
Functions
The function of the inputs and outputs on the control system depends on the safety circuit
created using the PNOZmulti Configurator. A chip card is used to download the safety cir-
cuit to the base unit. The base unit has 2 microcontrollers that monitor each other. They
evaluate the input circuits on the base unit and expansion modules and switch the outputs
on the base unit and expansion modules accordingly.
The LEDs on the base unit and expansion modules indicate the status of the configurable
control system PNOZmulti.
The online help on the PNOZmulti Configurator contains descriptions of the operating
modes and all the functions of the control system, plus connection examples.
System reaction time
Calculation of the maximum reaction time between an input switching off and a linked out-
put in the system switching off is described in the document "PNOZmulti System
Expansion [
29]".
Block diagram
=
Power
A1 A2
=
Input
Configurable
output
24 V 0 V
24 V
0 V
T1M21
O2
O0
O1
O3
IM1
I8I5
I11
I4
I9 I12 I13 I14 I15I7
I6
I10
IM2IM0
IM3
IM16
IM18
IM17
IM19
Interface
extension
module
USB
Interface
extension
module
Configurable
input/output
T2M22
T3M23
T0M20