Datasheet

PNOZmulti Mini products
Base units
PNOZ mm0p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
500
Function description
Functions
The function of the safety system's inputs and outputs depends on the safety circuit created
using the PNOZmulti Configurator. A chip card is used to download the safety circuit to the
base unit. The base unit has 2 microcontrollers that monitor each other. They evaluate the
input circuits and switch the outputs accordingly.
The LEDs indicate the status of the PNOZmulti safety system.
The LC display indicates the status of the inputs/outputs and the supply voltage.
The online help on the PNOZmulti Configurator contains descriptions of the operating
modes and all the functions of the PNOZmulti safety system, plus connection examples.
System reaction time
Calculation of the maximum reaction time between an input switching off and a linked out-
put in the system switching off is described in the document "PNOZmulti System
Expansion [
29]".
Block diagram
=
Power
A1 A2
=
Input
USB
IM1
I8I5
I11
I4 I9 I12 I13 I14 I15I7
I6
I10
IM2IM0 IM3 IM16 IM18IM17 IM19
Configurable
input/output
Configurable
output
24 V
0 V
T1M21
O2O0
O1
O3
T2M22 T3M23T0M20
24 V 0 V