Datasheet

PNOZmulti products
Fieldbus modules
PNOZ mc9p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
471
Front view
773731
Legend:
} X1: Profinet interface
} LED:
– ACT
– COM STAT
– MOD STAT
Function description
Functions
The virtual inputs and outputs that are to be transferred via the fieldbus PROFINET are se-
lected and configured in the PNOZmulti Configurator. The base unit and the fieldbus mod-
ule PNOZ mc9p are connected via a jumper. The fieldbus module is also supplied with
voltage via this jumper. After the supply voltage is switched on or the control system
PNOZmulti is reset, the fieldbus module PNOZ mc9p is configured and started automatic-
ally.
LEDs indicate the status of the fieldbus module on the fieldbus PROFINET .
The configuration is described in detail in the PNOZmulti Configurator's online help.