Datasheet

PNOZmulti products
Fieldbus modules
PNOZ mc8p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
466
Change IP settings
Once the IP addresses of the computer and PNOZ mc8p have been configured, you can
change the IP settings of the PNOZ mc8p.
} Connect the PNOZ mc8p to the computer.
} Call up the following html page: http://192.168.0.20/config.htm
} Configure the settings for the PNOZ mc8p.
Example:
IP address: 172.16.216.139
Subnet mask: 255.255.0.0
Gateway address: --
DNS1 address: --
DNS1 address: --
Host name: ---
Domain name: --
SMTP server: --
DHCP enabled: No
} Click on Store Configuration. The settings are transferred to the expansion module.
} Switch off the supply voltage.
} Set all DIP switches to zero.
} Switch on the supply voltage. The new IP address for the unit is now set.