Datasheet

PNOZmulti products
Fieldbus modules
PNOZ mc8p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
460
PNOZ mc8p
Overview
Unit features
Using the product PNOZ mc8p:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti .
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for Ethernet/IP and ModbusTCP
} Transmission rate 10 MBit/s (10BaseT) and 100 MBit/s (100BaseTX), full and half du-
plex
} IP address is set via DIP switches on the front of the unit
} Status indicators for communication and for errors
} 24 virtual inputs and outputs on the control system PNOZmulti can be defined in the
PNOZmulti Configurator for communication with the fieldbus EtherNet/IP, Modbus
TCP . The number of inputs and outputs can be extended to 128. Please note that
when the extended inputs and outputs 24 - 127 are used they have different properties
(see document entitled "Communication Interfaces").
} Max. 1 PNOZ mc8p can be connected to the base unit
} For details of the PNOZmulti base units that can be connected, please refer to the doc-
ument "PNOZmulti System Expansion".