Datasheet

PNOZmulti products
Fieldbus modules
PNOZ mc5.1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
438
INTERBUS interface
It is possible to define which inputs and outputs on the safety system will communicate with
INTERBUS FO. The PNOZ mc5.1p features RX and TX F-SMA screw connections for IBS
IN and RX and TX for IBS OUT for connecting to the INTERBUS FO.
IBS IN: Remote bus IN
TX: Transmitter
RX: Receiver
IBS OUT: Remote bus OUT
TX: Transmitter
RX: Receiver
Setting the transmission rate
The transmission rate is set using a jumper. You can choose between 500kBit/s and 2
MBit/s.
500 kBit/s:
500k 2M
2 MBit/s
500k 2M
Connecting the supply voltage
Connect the supply voltage to the base unit:
} Terminal 24 V and A1 (+): + 24VDC
} Terminal 0 V and A2 (-): 0 V
Download modified project to the PNOZmulti safety system
As soon as an additional expansion module has been connected to the system, the project
must be amended using the PNOZmulti Configurator. Proceed as described in the operat-
ing instructions for the base unit.