Datasheet

PNOZmulti products
Fieldbus modules
PNOZ mc4p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
417
Front view
PNOZ mc4p
X1
NS
DR
NA
1 2 3 4 5
V-
V+
CL
CH
SD
S1
S2
32
16
8
4
2
1
MS
ON
OFF
Legend:
} X1: DeviceNet interface (5-pin screw connector)
} LED:
– Power
– NS
– MS
Function description
Operation
The virtual inputs and outputs that are to be transferred via DeviceNet are selected and
configured in the PNOZmulti Configurator. The base unit and the expansion module PNOZ
mc4p are connected via a jumper. The expansion module PNOZ mc4p is also supplied with
voltage via this jumper.
The station address and the transmission rate are set using DIP switches. After the supply
voltage is switched on or the PNOZmulti control system is reset, the expansion module
PNOZ mc4p is configured and started automatically.
LEDs indicate the status of the expansion module on DeviceNet.
The configuration is described in detail in the PNOZmulti Configurator's online help.