Datasheet

PNOZmulti products
Fieldbus modules
PNOZ mc2.1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
403
} Information given in the Technical details [ 404] must be followed.
} Use copper wiring with a temperature stability of 75 °C.
Please note the following when connecting to EtherCAT:
} The following minimum requirements of the connection cable and connector must be
met:
– Only use standard industrial Ethernet cable and connectors.
– Only use double-shielded twisted pair cable and shielded RJ45 connectors (indus-
trial connectors).
– 100BaseTX cable in accordance with the Ethernet standard (min. Category 5)
} Measures to protect against interference:
Ensure the requirements for the industrial use of EtherCAT are met, as stated in the In-
stallation Manual published by the User Group.
Interface assignment
RJ45 socket
8-pin
PIN Standard
8 1
1 TD+ (Transmit+)
2 TD- (Transmit-)
3 RD+ (Receive+)
4 n.c.
5 n.c.
6 RD- (Receive-)
7 n.c.
8 n.c.
n.c.: Not connected
Preparing for operation
} Install Device Description File
Install the Device Description File in your configuration software. You can only then use
the PNOZ mc2.1p.
} Connect the supply voltage to the base unit:
Terminals 24 V and A1 (+): + 24VDC
Terminals 0 V and A2 (-) : 0 V