Datasheet

PNOZmulti products
Speed monitors
PNOZ ms3p HTL
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
347
Pin assignment of RJ45 socket
RJ45 socket
8-pin
PIN Track
8 1
1 5 V
2 0 V
3 T
4 A
5 /A
6 /Z
7 B
8 /B
Connecting the incremental encoder
Proceed as follows when connecting the incremental encoder:
} The incremental encoder may be connected via an adapter or directly to the speed
monitor.
} The incremental encoder on connector X12 monitors axis 1; the incremental encoder
on connector X22 monitors axis 2.
} Use only shielded cables for all connections
} 0 V from the incremental encoder and speed monitor should always be connected.
} Position the terminating resistors of the signal lines as close as possible to the speed
monitor input.