Datasheet

PNOZmulti products
Link modules
PNOZ ml2p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
260
Front view
Key:
} 0 V, 24 V:
Supply connections
} CAN+, CAN-, VCC, GND:
Connection for decentralised modules
} Shield:
Connection for the cable shield
Function description
Operation
The link module PNOZ ml2p is used to safely transfer the input information from decentral-
ised modules to the safety system PNOZmulti.
The function of the inputs and outputs on the control system depends on the safety circuit
created using the PNOZmulti Configurator. A chip card is used to download the safety cir-
cuit to the base unit. The base unit has 2 microcontrollers that monitor each other. They
evaluate the input circuits on the base unit and expansion modules and switch the outputs
on the base unit and expansion modules accordingly.
The LEDs on the base unit and expansion modules indicate the status of the configurable
control system PNOZmulti.
The online help on the PNOZmulti Configurator contains descriptions of the operating
modes and all the functions of the control system, plus connection examples.