Datasheet

PNOZmulti products
Analogue input module
PNOZ ma1p
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
244
Environmental data 773812 773813
Shock stress
In accordance with the standard EN 60068-2-27 EN 60068-2-27
Acceleration 15g 15g
Duration 11 ms 11 ms
Max. operating height above sea
level
2000 m 2000 m
Airgap creepage
In accordance with the standard EN 61131-2 EN 61131-2
Overvoltage category III III
Pollution degree 2 2
Rated insulation voltage 30 V 30 V
Protection type
In accordance with the standard EN 60529 EN 60529
Mounting area (e.g. control cab-
inet) IP54 IP54
Housing IP20 IP20
Terminals IP20 IP20
Mechanical data 773812 773813
Mounting position Horizontal on top hat rail Horizontal on top hat rail
DIN rail
Top hat rail 35 x 7,5 EN 50022 35 x 7,5 EN 50022
Recess width 27 mm 27 mm
Material
Bottom PPO UL 94 V0 PPO UL 94 V0
Front ABS UL 94 V0 ABS UL 94 V0
Connection type Spring-loaded terminal, screw
terminal
Spring-loaded terminal, screw
terminal
Conductor cross section with screw
terminals
1 core flexible 0,25 - 1,50 mm², 24 - 16 AWG 0,25 - 1,50 mm², 24 - 16 AWG
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,25 - 0,75 mm², 24 - 20 AWG 0,25 - 0,75 mm², 24 - 20 AWG
Torque setting with screw terminals 0,25 Nm 0,25 Nm
Stripping length with screw termin-
als
7 mm 7 mm
Conductor cross section with
spring-loaded terminals
1 core flexible without crimp
connector 0,25 - 1,50 mm², 24 - 16 AWG 0,25 - 1,50 mm², 24 - 16 AWG
1 core flexible with crimp con-
nector
0,25 - 0,75 mm², 24 - 20 AWG 0,25 - 0,75 mm², 24 - 20 AWG