Datasheet

Basics
System description
Diagnostics
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2015-11
15
} Virtual inputs and outputs:
Virtual inputs can be set. The status of the virtual inputs and outputs can be scanned.
} Diagnostic word:
The diagnostic word contains the status of elements from the user program within the
PNOZmulti.
} Test data:
To check communication.
} Data in table form:
This is structured data (arranged in tables and segments) from the PNOZmulti, as it
could also be read via a fieldbus module:
– Configuration
– Status of the inputs and outputs
– Status of LED
– Diagnostic word
– Element types
Expanded diagnostic options using a diagnostic terminal, e.g. PMImicro diag. An expanded
diagnostic configuration can be created in the PNOZmulti Configurator. The diagnostic con-
figuration enables appropriate event messages to be displayed in the case of:
} Errors in or on the PNOZmulti:
Includes the event messages that are triggered when there are errors in or on the
PNOZmulti (error stack)
} Changes in the operating status of the PNOZmulti; messages are triggered when safe-
guards, inputs, outputs and connection points reach a defined state
PNOZmulti event messages can also be supplemented through additional information,
which is helpful during diagnostics. With expanded diagnostics, a display unit (e.g. PMImi-
cro diag) is connected to a PNOZmulti. If an event occurs in or on the PNOZmulti, an event
telegram is sent to the display unit. The event telegram is evaluated in the display unit. In
most cases, the event message that corresponds to the event is displayed and is entered in
the event list. The event message contains a description of the event. A remedy can be dis-
played for each event message. The remedy describes how to react to the event, in other
words, what "actions" to take.
The diagnostic configuration is project-related, i.e. a separate diagnostic configuration is
created for each PNOZmulti project. Then the diagnostic configuration is downloaded to the
PNOZmulti and to the display unit. The diagnostic configuration is described in detail in the
PNOZmulti Configurator's online help.