Datasheet
Electronic monitoring relays PMDsigma
Insulation monitor
PMD s20
1001753-EN-02-2011-05Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Application circuit 3 AC/DC
Inbetriebnahme_Anwendung_Bild_4
Inbetriebnahme
Parameter setting
Inbetriebnahme_Drehknopf_Funktion
The menu settings are made on the
unit's display via a rotary knob. You
have the option to make the settings
on the knob by hand or with a screw-
driver. If you make the settings with a
screwdriver, the knob can remain
within the unit.
Installation
Montage_Sigma_allgemein
The unit should be installed in a
control cabinet with a protection
type of at least IP54.
Use the notch on the rear of the unit
to attach it to a mounting rail.
In environments exposed to heavy
vibration or when installing on a ver-
tical mounting rail (35 mm), the unit
should be secured using a fixing el-
ement (e.g. retaining bracket or end
angle).
Push the unit upwards or down-
wards before lifting it from the
mounting rail.
L1
L2
1L1
1L2
E1
PE
L3
R
e
F1
F2
G1
T1
alternativ
alternative
alternatif
Test
Y3
Reset
12
14
11
A1
A2
24
22
21
Y1
Y2
B1
B2
FE
PMD s20