Datasheet

Electronic monitoring relays PMDsigma
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
True power monitoring
PMD s10
NSG-D-2-422-2014-04
Circuit for motor (1 AC) with CT
Inbetriebnahme_Anwendung_Bild_4
Inbetriebnahme
Parameter setting
Funktionsbeschreibung
Parameters such as switching thresh-
olds, start-up suppression time, reac-
tion time and rest mode, for example,
are set via a rotary knob.
A display indicates the current values
plus the set values.
The parameters can be saved on a
chip card. This chip card can be used
as a backup copy of the parameters or
can be used to transfer the parameters
to another unit.
Installation
Montage_Sigma_allgemein
` The unit should be installed in a
control cabinet with a protection
type of at least IP54.
` Use the notch on the rear of the unit
to attach it to a mounting rail.
` In environments exposed to heavy
vibration or when installing on a ver-
tical mounting rail (35 mm), the unit
should be secured using a fixing el-
ement (e.g. retaining bracket or end
angle).
` Push the unit upwards or down-
wards before lifting it from the
mounting rail.
L1
M1
K1
M1~
PE
N
12 14
11
A1
L2
U/I1
U
I
N
> 12A
L3
A2
24
22
21
Y1
Y2
I
0V
W/I3
K3
L1
K1
24V
0V
A
V
H2
K
L
k
l
K1
U1
U2
PMD s10
Reset
extern