Datasheet

Relays for functional safety
Safety relays PNOZsigma
PNOZ s30
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2016-09
858
Level
Designation
on the display Description Settings
4 (F1 ... F9)
(P0 ... P15)
(Direct. Left, Direct.
Right)
Select left-hand or right-hand dir-
ection monitoring
1 Assign Outputs Assign functions to outputs
2 Output
(Rel.1 ... Out 4)
Default
Off
Each output can be assigned a
switch function (F1...F9) or a
range (F2-F3, F4-F5, F6-F7, F8-
F9). Each output can also be used
as an error output (error) or be
switched off (Off).
When used as an error output, the
following applies:
Fault: Output off
No error: Output on
For ranges, the following applies:
The lower range limit is the switch
function with the lower number
(e.g. F2),
The upper range limit is the switch
function with the higher number
(e.g. F3).
Outputs:
Rel.1: Relay output 1
Rel.2: Relay output 2
Ext. 1: External output 1
Ext. 2: External output 2
Out 1 ... Out 4: Semiconductor
outputs 1 ... 4
-Off
-F1...F9
-F2-F3
-F4-F5
-F6-F7
-F8-F9
-error
1 Start mode Select start behaviour