Datasheet

Relays for functional safety
Safety relays PNOZsigma
PNOZ s30
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
2016-09
848
6. To read the data on the chip card, click on the Memory Card directory and then select
Read Data from Card.
7. When Data read successfully is displayed on the software interface, the data can be
saved as a hex file in any directory on the computer.
8. Make sure that the corresponding configuration CRC, which you noted down, is saved
in the same directory.
Download configuration from the computer to the PNOZ s30
1. Insert a chip card into the holder for the chip card reader and insert this into the chip
card reader.
2. Start the SmartCardCommander software.
3. To write the chip card, select Write Data to Card and confirm with Yes.
4. Insert the chip card in the PNOZ s30 and proceed as described under Read data from
chip card [
846].
5. To ensure that the configuration has been transferred correctly, check that the CRC for
the configuration in the PNOZ s30 matches the configuration CRC you noted down on
the computer.
Menu overview
The tables provide an overview of the menu settings.
The Excel file provides a detailed view of the setting options:
PNOZ_s30_Menu_Overview.
Permanent display
If no settings are made, information regarding the configuration and current values are
shown on the display.
You can change the permanent display on the display in the "Settings" menu.