Datasheet

BAPSENsl1.0p1.1/1.1VA/2.1/2.2
OperatingManualBAPSENsl1.0p1.1/1.1VA/2.1/2.2
21909EN09
6
INFORMATION
Thisgivesadviceonapplicationsandprovidesinformationonspecialfea
tures.
Safety
Intendeduse
Thesafetygatesystemmeetstherequirementsinaccordancewith
} EN602041:2006
} EN6094753:2005:PDFMwiththecorrespondingactuatorPSENsl1.0orPSEN
sl1.0fm(seeTechnicaldetails:Systemwithnormalactuator[ 25],Technicaldetail:
Systemwithfreemovingactuator[ 28],undermechanicaldata)
} EN62061:2005:SILCL3
} ENISO138491:2008:PLeandCat.4
} Thesafetyswitchmayonlybeusedwiththecorrespondingactuator(seeTechnicalde
tails:Systemwithnormalactuator,[ 25],Technicaldetail:Systemwithfreemoving
actuator[ 28],undermechanicaldata).
ThesafetylevelPLe(Cat.4)/SILCL3isonlyachievedif
} thesafetyoutputsuse2channelprocessing.
Thefollowingisdeemedimproperuseinparticular:
} Anycomponent,technicalorelectricalmodificationtotheproduct
} Useoftheproductoutsidetheareasdescribedinthismanual
} Useoftheproductoutsidethetechnicaldetails(seechapterentitled"TechnicalDe
tails").
NOTICE
EMCcompliantelectricalinstallation
Theproductisdesignedforuseinanindustrialenvironment.Theproduct
maycauseinterferenceifinstalledinotherenvironments.Ifinstalledinother
environments,measuresshouldbetakentocomplywiththeapplicable
standardsanddirectivesfortherespectiveinstallationsitewithregardtoin
terference.
INFORMATION
Themagnetsurfaceandcounterplatemayheatup.Wheninstalling,make
surethatheatdissipationisguaranteed.