Datasheet

BAPSENsl1.0p1.1/1.1VA/2.1/2.2
OperatingManualBAPSENsl1.0p1.1/1.1VA/2.1/2.2
21909EN09
16
} Amaximumof8learningproceduresarepossible.
NOTICE
Theactuatormustnotberemovedduringthelearningprocedure.
INFORMATION
Thisactuatorcannotberetaughtonthesamesafetyswitch.
PSENsl1.02.2
Thefirstcorrespondingactuatortobedetectedbythesafetyswitch(seeTechnicaldetails:
Systemwithnormalactuator[ 25],Systemwithfreemovingactuator[ 28],under
mechanicaldata)isautomaticallytaughtinassoonasitisbroughtintotheresponserange.
NOTICE
Nootheractuatormaybetaughtinoncethisactuatorhasbeentaught.
Installation
} WheninstallingmakesureyoucomplywiththerequirementsofDINEN1088.
} Thesafetygatesystemcanbeinstalledonleftorrighthingedswinggatesoronsliding
gates.
WARNING!
Potentiallossofsafetyfunctionduetogrossmanipulation
Dependingontheapplication,seriousinjuryordeathmayresult.
Useappropriateinstallationmeasurestoprevent
– Thewiringbeingmodified.
– Ashortcircuitbeinggeneratedontheconnector.
– Thepossibilityofusingasecondactuatortoopenthesafetygate.
} Thesafetyswitchandactuatorshouldbeinstalledoppositeeachotherinparallel.
} Theactuatorshouldbesecuredpermanentlyusingsafetyscrewsorrivets.