User Manual

IM_100.CCF.20170801-EN T1

Product Overview

Tip Tip! If you are using optionally the Pilotfly H2 1-Hand Holder, which is available

as sparepart. Please refer the instruction manual of the H2 how you can use

the different modes with the H2 1-Hand Holder.

Tip Tip! You can use the T1 also in upright mode or briefcase position. The new

position is recognized automatically. All above mentioned modes can also be

selcted in these conditions. Only home move is then not supported.

Acoustic signals - Buzzer

Action / Event Sound sequence

Power on Initialization sound sequence during system boot

up and initialisation

Initialization in process Be~Bi~Li~Bi~Li

Calibrating Dn~Dn~Dn~Dn~Dn~Dn

Low batteries Continuous cricket sound

Use the SimpleBGC 32 Bit Software GUI to change the volume oft he buzzer or to deactivte the buzzer 

5.9 Extended settings for advanced users – View Level „Advanced“ 5.12 Buzzer and LED settings.

Scope of delivery

1 x Pilotfly T1 Gimbal

1 x Pilotfly Tuning Stand

1 x Adapter plate

1 x Mini Tripod

1 x Carrying case

1 x 4-Bay charger

1 x Battery Set

(4x 18650 Li-Ion / 1 x 18350 Li-Ion)

1 x USB cable

1 x Quick Start Guide