User Manual

IM_100.CCF.20170801-EN T1

Using the Software PC/MAC

Buzzer

During the rotation:

11. Motion time-lapse. Triple press the home button to select the direction of YAW rotation (left or

right).

12. Stop rotation. Press the mode button for 1 sec to stop time-lapse rotation.

13. Move Home. Tap on the home button to initiate Home move function.

14. Leave time-lapse mode: Long press the home button to exit the time-lapse mode and return to

the joystick mode.

Tip Tip! If you are using optionally the Pilotfly H2 1-Hand Holder, which is available

as sparepart. Please refer the instruction manual of the H2 how you can use

the time-lapse function with the H2 1-Hand Holder, too.

5.12 BUZZER and LED settings – ADVANCED

1. Select the register "Service" and go to the

functional block „Buzzer and LED“.

2. Here you can set, when the Buzzer should

give an acoustic signal and if the Buzzer

shall be deactivated completely. Therefore,

deactivate the respective check boxes.

3. Press the button "WRITE" to transfer the

settings onto your Gimbal.