User Manual

IM_100.CCF.20170801-EN T1
49
Using the Software PC/MAC
–
Time
lapse
7. Enter the time-lapse mode. To use the time-lapse function, hold the home button pressed. All
five LEDs will flash short-time which indicates the time-laps mode.
8. Select speed. Press the mode button
to select the speed of rotation.
LED indicates which speed mode is active.
1: 60s/360°
2: 120min/360°
3: 60min/360°
4: 30min/360°
5: 10min/360°
34
9. Choose direction. Double press the Home
Button to select the direction of YAW
rotation (left or right).
 3 LEDs on the left will indicate for
1.5 s rotation to the left
 3 LEDs on the right will indicate for
1.5 s rotation to the right
35
Tip Function! Pitch angle can be adjusted via joystick to get right shooting angle
before starting time-lapse.
(YAW axis on some Pilotfly Gimbals are limited and 360°rotation is not possible
on that models. Therefore, adjust YAW angle first on that models to get the
maximum angle for time-lapse.)
10. Start rotation. Press the mode button for 1 sec to start the time-lapse rotation. Flashing LED
indicates active time-lapse speed mode (Speed can be changed any time while pressing the mode
button ).
Tip Tip! Before starting, perform a GYRO calibration to prevent horizontal drift.