User Manual

IM_100.CCF.20170801-EN T1
26
Making a Bluetooth connection
3.2 Pairing with the Bluetooth handle (Joystick)
1. Press both MODE and HOME Button for 3 seconds
to clear bluetooth paring then power off.
2. Re-Power on. The LED on left side will be constant
on when the pairing was successful.
17
Software
Installation
All Pilotfly products use the Alexmos Chip and therefore can be used with the SimpleBGC software which
is provided by Basecam Electronics. The software can be installed on different operating systems, such as
Windows, OSs, Linux and App Android and iOS.
Tip Compatibility problems! The driver version 6.7.4 for Windows can lead
to problems with the connecting or data communication. This is to be
seen in a raised reaction of the SimpleBGC software. If this should be
the case,
please download and install
the driver
version 6
.7.2
.
4.1 Installation on Windows
1. Go to our webseite www.pilotfly.de or www.pilotfly.com.tw on to the support page.
2. Download the most current version of the SimpleBGC software there.
3. Download the most current version of the "CP2102 USBtoUART" driver there.
4. Install the driver CP2102 USBtoUART.
5. Extract the SimpleBGC Software and start the Software with SimpleBGC_GUI.exe
4.2 Installation on Linux
1. Go to our webseite www.pilotfly.de or www.pilotfly.com.tw on to the support page.
2. Download the most current version of the SimpleBGC software there.
3. Extract the SimpleBGC Software and start the Software with run.sh