User Manual

IM_100.CCF.20170801-EN T1

Setup and operating

3. Checking the battery level. Press the power level

indicator button on the Pilotfly T1 Gimbal backside.

The battery level is indicated by 4 LEDs (25%,

50%, 75%, 100%).

4. Using the “Mode“-key button. Set the desired

operating mode or function with the "Mode"-key

button Product overview“Mode“-key button.

5. Using the “Home / Time-lapse Mode“-key

button.

 Short press to move to home position.

 Long press to enter the time-lapse mode.

All 5 LEDs will flash short-time which indicates

the time-lapse mode. How to use the time-

lapse mode go to  5.11 Using the time lapse

settings – ADVANCED

6. Using the 4-way joystick. Use the joystick to pan

(yaw left/right) and tilt (pitch up/down) the camera.