User Manual

IM_100.CCF.20170801-EN T1

Setup and operating

2.3 Assembling and adjustment of the camera

Warning Injury danger! Implicitely follow the safety instructions and warning

notices within the instruction manual of your camera!

Caution Property damage! Implicitly do not unscrew the locking screw of

the roll axis completely. Otherwise, the camera with L-arm to the

pitch motor will drop down and the wiring which is arranged behind

will be damaged.

Tip Function! Make sure that both, the camera and the Gimbal remain

switched off during the assembly and adjustment.

Tip Tip! Watch our video on YouTube how to install and balance the

camera: https://www.youtube.com/watch?v=eeF16D89WcE

1. Prepare the camera. Remove the objective lid and

make sure that the batteries are fully charged and

the memory card is installed in the camera before

you attach the camera to the Gimbal.

2. Mount camera on the plate. Mount the adapter

plate on the camera body and ensure that the plate

is fixed and aligned properly. Slide the camera with

the adapter plate into the mounting system of the

Gimbal and make sure you balanced the camera

properly and fixed the screw.