User Manual

IM_100.CCF.20170801-EN T1

Setup and operating

5. Insert the fully charged

batteries as shown in the

figure beside and ensure that

+ Pole is and - Pole is in the

correct direction as

illustrated.

6. Insert the fully charged battery of the Bluetooth handle as

shown in the figure beside and ensure that + Pole is

inside and - Pole is at cap side as illustrated.

1. Ensure, that the handle is powered off before you fix the

handle onto the gimble.

2. Put the handle on to the tune stand and screw the gimble

together with the handle.

3. Check at the assembly that the grip fits with the markings

(arrows) and is screwed together tightly. Optionally the

Pilotfly H2 1-Hand Holder is available as sparepart and

can be used, too.