Quick Start Guide for The LockedBrands™ Pillar™ #0271a5 Meet The Pillar. The voice-activated, app-controlled lockbox.
This QuickStart Guide is also available through the app.
The Pillar™ Reset button USB port On/Off switch 3 MAC address 2
Step 1 Getting Started • Download The LockedBrands App to control your Pillar 3
Step 2 Setting Up Your LockedBrands Account • Open the app on your device and follow the on screen instructions 4
Step 3 Power up The Pillar™ • Plug in The Pillar using the supplied USB charger & cable • Turn on the power with the “On/Off” switch 6 A white light will start circling the LED ring *In order to guarantee performance, be sure to use the supplied USB cable and power supply 5
Step 4.
Step 4.1 Connect to WiFi • Open settings on your smart device and select WiFi • Select the Network named: “Pillar XXXXXX” and wait for connection, indicated by the checkmark • It may take several minutes to connect - Unsecured Network warning is OK • Go back to the LockedBrands app *WiFi is 2.
Step 4.
Step 4.
Step 4.4 Connect to WiFi • The Pillar will now reboot •LED lights will turn red, white, yellow, and then blue.
Step 5.
Step 5.
Step 6 Opening your Pillar™ The “My Locks” page is where you can view and unlock the Pillars registered to your account.
More Functions of your Pillar™ • To view and customize all of the functions your Pillar has to offer, click its name from the “My Locks” page • Visit the support page at www.lockedbrands.
#0271a5 #f28923 Patent Pending 2018 LockedBrands LLC. LockedBrands, The Pillar and the LockedBrands logo are all trademarks of LockedBrands LLC. All Rights Reserved.
